Front Forward Upper & Lower Control Arms Polaris Ranger XP 1000

Front Forward Upper & Lower Control Arms Polaris Ranger XP 1000

Code: HDFFA-RNG1-B1-BJI
$664.95
In Stock

HDFFA-RNG1-B1-BJI
Front Forward Upper & Lower Control Arms Polaris Ranger XP 1000

Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.

Features
    Adjustable heat-treated collars for camber adjustability with a 1” thread
    Raked forward 1.5"
    Over 3 degrees of camber adjustment in each direction
    Heavy duty ball joint brackets to eliminate deformation issues, Keller ball joint compatible
    Ladder bar compatible with the 1.5” ID clamps
    Extreme duty 1.5” x .188” DOM steel construction
    1.75” of added ground clearance compared to OEM lower arm
    Mounting accommodations for OEM brake lines using OEM tabs instead of P-clamps
    Optimized sway bar linkage angles
    Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
    Powder Coated
    Custom Colors Available upon request. (Customer must provide paint code)

Heavy Duty Strength
High Lifter’s new heavy duty control arms add more support than factory. The upper control arms that come stock on a Polaris Ranger are more robust than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. High Lifter arms are constructed out of 1.5” DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in steel thickness for added durability and strength.

Built in Adjustability
The lower arms also feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8” of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you’re adding to your ride. This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.

Increased Ground Clearance
We maximized ground clearance by strategically arching the lower control arm with double and TRIPLE bends. This unique design allowed us to get an additional 1.75” of ground clearance to avoid impacting those nasty trail obstacles. These bends maintain the factory geometry, which helps reduce wear on components like axles and tie rods. Our forward arms allow you to run larger tires without a suspension lift. We’ve improved the upper control arm by repositioning the sway bar tab. This will reduce the extreme angles places on the sway bar links and reduce wear.

Reinforced Ball Joints Brackets
Portals and large tires apply torque that can distort the ball joint bracket, leading to failure of the arms. With over 130% increase in the ball joint mounting area, we are helping to prevent breakdown or “egging” of the mounting bracket.

Tire Fitment: Up to 31"
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Optional Preinstalled Ball Joints
High Lifter’s service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured. Purchasing control arms with the ball joints already installed adds to easy installation and prevents damage due to improper installation, which is not covered by High Lifter’s Lifetime Warranty. The ball joints preinstalled in this kit are BJP-3 and BJP-5.

Fitment:
2018 Polaris Ranger 1000 XP
2018 Polaris Ranger 1000 XP Northstar
2019 Polaris Ranger 1000 XP Crew Northstar
2019 Polaris Ranger 1000 XP Crew
2019 Polaris Ranger 1000 XP
2019 Polaris Ranger 1000 XP Premium
2019 Polaris Ranger 1000 XP 20th Anniv Edition
2019 Polaris Ranger 1000 XP Crew Premium
2019 Polaris Ranger 1000 XP Crew 20th Anniv Edition
2019 Polaris Ranger 1000 XP Northstar
2019 Polaris Ranger 1000 XP High Lifter Edition
2019 Polaris Ranger 1000 XP Crew High Lifter Edition
2019 Polaris Ranger 1000 XP Back Country
2019 Polaris Ranger 1000 XP Crew Back Country
2020 Polaris Ranger 1000 XP Premium
2020 Polaris Ranger 1000 XP NorthStar
2020 Polaris Ranger 1000 XP Texas Edition
2020 Polaris Ranger 1000 XP High Lifter Edition
2020 Polaris Ranger 1000
2020 Polaris Ranger 1000 EPS
2020 Polaris Ranger 1000 Premium
2020 Polaris Ranger 1000 XP Crew Premium
2020 Polaris Ranger 1000 XP Crew NorthStar
2020 Polaris Ranger 1000 XP Crew Texas Edition
2020 Polaris Ranger 1000 XP Crew High Lifter Edition
2020 Polaris Ranger 1000 Crew
2020 Polaris Ranger 1000 Crew EPS
2020 Polaris Ranger 1000 Crew Premium

HDFFA-RNG1-B1-BJI
Front Forward Upper & Lower Control Arms Polaris Ranger XP 1000

Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.

Features
    Adjustable heat-treated collars for camber adjustability with a 1” thread
    Raked forward 1.5"
    Over 3 degrees of camber adjustment in each direction
    Heavy duty ball joint brackets to eliminate deformation issues, Keller ball joint compatible
    Ladder bar compatible with the 1.5” ID clamps
    Extreme duty 1.5” x .188” DOM steel construction
    1.75” of added ground clearance compared to OEM lower arm
    Mounting accommodations for OEM brake lines using OEM tabs instead of P-clamps
    Optimized sway bar linkage angles
    Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
    Powder Coated
    Custom Colors Available upon request. (Customer must provide paint code)

Heavy Duty Strength
High Lifter’s new heavy duty control arms add more support than factory. The upper control arms that come stock on a Polaris Ranger are more robust than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. High Lifter arms are constructed out of 1.5” DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in steel thickness for added durability and strength.

Built in Adjustability
The lower arms also feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8” of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you’re adding to your ride. This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.

Increased Ground Clearance
We maximized ground clearance by strategically arching the lower control arm with double and TRIPLE bends. This unique design allowed us to get an additional 1.75” of ground clearance to avoid impacting those nasty trail obstacles. These bends maintain the factory geometry, which helps reduce wear on components like axles and tie rods. Our forward arms allow you to run larger tires without a suspension lift. We’ve improved the upper control arm by repositioning the sway bar tab. This will reduce the extreme angles places on the sway bar links and reduce wear.

Reinforced Ball Joints Brackets
Portals and large tires apply torque that can distort the ball joint bracket, leading to failure of the arms. With over 130% increase in the ball joint mounting area, we are helping to prevent breakdown or “egging” of the mounting bracket.

Tire Fitment: Up to 31"
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Optional Preinstalled Ball Joints
High Lifter’s service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured. Purchasing control arms with the ball joints already installed adds to easy installation and prevents damage due to improper installation, which is not covered by High Lifter’s Lifetime Warranty. The ball joints preinstalled in this kit are BJP-3 and BJP-5.

Fitment:
2018 Polaris Ranger 1000 XP
2018 Polaris Ranger 1000 XP Northstar
2019 Polaris Ranger 1000 XP Crew Northstar
2019 Polaris Ranger 1000 XP Crew
2019 Polaris Ranger 1000 XP
2019 Polaris Ranger 1000 XP Premium
2019 Polaris Ranger 1000 XP 20th Anniv Edition
2019 Polaris Ranger 1000 XP Crew Premium
2019 Polaris Ranger 1000 XP Crew 20th Anniv Edition
2019 Polaris Ranger 1000 XP Northstar
2019 Polaris Ranger 1000 XP High Lifter Edition
2019 Polaris Ranger 1000 XP Crew High Lifter Edition
2019 Polaris Ranger 1000 XP Back Country
2019 Polaris Ranger 1000 XP Crew Back Country
2020 Polaris Ranger 1000 XP Premium
2020 Polaris Ranger 1000 XP NorthStar
2020 Polaris Ranger 1000 XP Texas Edition
2020 Polaris Ranger 1000 XP High Lifter Edition
2020 Polaris Ranger 1000
2020 Polaris Ranger 1000 EPS
2020 Polaris Ranger 1000 Premium
2020 Polaris Ranger 1000 XP Crew Premium
2020 Polaris Ranger 1000 XP Crew NorthStar
2020 Polaris Ranger 1000 XP Crew Texas Edition
2020 Polaris Ranger 1000 XP Crew High Lifter Edition
2020 Polaris Ranger 1000 Crew
2020 Polaris Ranger 1000 Crew EPS
2020 Polaris Ranger 1000 Crew Premium

Tire infographic

We review every order carefully to make sure you have the right parts at the right time for less money.


DOMESTIC ORDERS:


  • Orders will be processed within 24 hours for orders placed from 9:00 am till 2:00 pm EST Monday - Thursday.
  • We offer FREE SHIPPING for US Orders (48 states only) over $75.00.
  • Shipping to Alaska, Hawaii, Puerto Rico, or APO/FPO Addresses: Standard Shipping Deliveries may take longer -- up to 21 days for APO/FPO addresses.
  • Signature Requirements: Signature upon delivery required for shipments over $250.00.
  • USPS Priority Mail packages take about 2-5 business days to arrive at locations inside the United States.
  • FedEx Home Delivery delivers Tuesday - Saturday.
  • FedEx Express Saver 3 day service (Excluding Sat. and holiday delivery).
  • FedEx 2 day service (Excluding Sat. and holiday delivery).
  • FedEx Standard Overnight service (Excluding Sat. and holiday delivery).

Please be advised that we reserve the right to alter shipping method.


INTERNATIONAL ORDERS:


  • The order will be shipped within one business day after receiving a payment.
  • Packages shipped via the United States Postal Service est. delivery is 4-10 business days, but can take up to 3 weeks.
  • Tracking information is avaliable with all shipping options.
  • Duties and taxes are due upon receipt of an international order and are the responsibility of the recipient. 
    Please check with your local authorities to see if you will have to pay customs, tariffs, or any other types of import fee.
    We have no way of knowing what the policy is for each country.

CUSTOMER SERVICE INFORMATION:


If there is a problem with your order, we want to make things right. At we do our absolute best to satisfy our customers. Please call at (770) 490-7162 or (678) 489-2368 between 9:00 am and 5:00 pm Monday thru Friday, for:

  • Shipment Confirmation
  • Problem Resolution
  • Product Comments

We consider our customers a vital part of our organization and welcome any suggestions you can make about how we can improve our business.

A&J Parts
129 Bethea Rd
Suite 405
Fayetteville, GA 30214